Wall-mounted Air Sterilizer
Photocatalisis Air Purifier
Low energy consumption, large dust collection and easy maintenance.
3-in-1 Semiconductor Technology Built-in Antibacterial and mold prof filter Microcomputer program control
The main application scope is to remove in the decoration of hospital wards, new houses, restaurants, schools, shopping malls, research institutes, airports, training centers, etc…
Model And Parameters
|Air Circulation Max||600m3/h||800m3/h||1000m3/h||1200m3/h|
|Recommended Room||≤ 60m3||≤ 80m3/h||≤ 100m3/h||≤ 120m3/h|
|Sterilization Rate||≥ 90%|
|Noise||≤ 55dB (A)|
|UVC Lamp Life||≥ 8000-1200h|
|Outer UVC Leakage||≤ 5 u w/cm2|
|Ozone Concentration||≤ 0.1mg/m3|
|Semiconductor Ionization Voltage||± 5.0 ∼ 10.0KV|
|Input Power||≤ 90W||≤ 95W||≤ 100W||≤ 105W|
|Voltage/Frequency||-5ºC ∼ 45ºC ≤ 90% RH|
|Dimension||1000 x 330 x 200mm 11kgs|
|Type||Wall Mounting Type|
- Adopt patent technology : 3 In 1 Semiconductor technology.
- Built-in antibacterial mold-proof filter to filter dust in the air.
- Adopt microcomputer program control, HD LCE display Imported control chip with PM.5, air quality, air temperature and humidity monitoring.
- With setting of six timed working hours, time loop operation.
- Remoter control with far distance infrared receiver, can be 45 degrees of arbitrary control.
- The air inlet from top surface, fresh air supply like wind from bottom, so the sterilization is comprehensive.
- In the timed and manual mode, high, medium and low wind speed gears can be selected for operation.
- In the timed and manual mode, individually activated light wave reaction device or semiconductor device can be set.
- Convenient maintenance and maintenance: it can be continue to use afterclean.